EE Systems Group eLEDing EE824W-AI18 Quick Start Manual

Thank you for choosing eLEDing! World's First AI SMART solar powered lighting:
This innovative AI SMART light is unlike all solar lights in the current market without any manually functional setting up. It's able to Auto-
Optimize performance via AI firmware self-calibration in four seasons and different geographical location. US and international patents
granted and pending worldwide. All rights reserved. Users must read this manual before installation, comply with local standard and regulations
of construction & electrical/electronic projects, follow the safety guidelines to prevent any possible accidents, incident and/or injuries. Consult
experienced contractor/installer and electrical technicians for assistance.

One Step Setup (Just 1 Click!)

Suggest:
Charge 1-2
days before
Push
installing with
Switch
switch in OFF
position

AI SMART lighting profile

The fixed hours high
brightness period will
be automatically
adjusted depends on
the multiple factors to
ensure all-night
illumination
Second stage Intelligence Power Management (IPM) system : monitor & adjust power consumption
Switch to
If low power
AUTO Mode
(20% left)
T
Tempered
Glass
Solar Panel
Bracket
U or
Arm
Teeth
Clamp
Power ON
Switch: One
Step Push ON
Diameter: 2" up to 5"
Mounting High: 6'-15'
5-min walk
Light ON
test mode
If
Yes
Light ON
Motion
No
Light OFF
Full brightness
Up to 4 Hours
Dimming brightness Motion
until dawn detected
Yes
ON with full
Motion
brightness
No
Light OFF
Thermal
Dissipation
Air Duct
Angle
Adjustment
Nuts
ePIR
Sensor
CREE LED
Illuminators
EE Systems Group Inc.
12346 Valley Blvd, El Monte, CA 91732 Phone Number: 1-877-579-3889 Fax: 626-452-9194 Web: www.eleding.com
Yes
Light
Daytime?
OFF
5 min
No
Light turns ON
In real critical weather
AI Mode
come to
Max
brightness
NO
Full Charge
Yes
AI Mode
Back to
As AI SMART version, once initially power ON, it needs at
least one day automatic self-calibration to make it works at
maximum performance in most geographical environment.
Installation Guidelines (video
1. Securely mount the unit on top of 2"-5" pole or wall surface, adjust
the light head direction by the applications. Pre-charge under sunny day
for 1-2 days with power OFF is recommended.
2. Solar Panel must be mounted at a non-obstructed position/area that
allows at least 4-8 hours direct sunlight daily all year round. For most of
the North America projects, adjust the tilt of the solar panel at 0-45°
degrees based on your actual location (15° is default setting for most
case in use). The solar panel can be pointed to between east to west,
south will be the best Facing-to-Sun direction and definitely NOT to
north. For northern hemisphere installations, a south-facing position is
best and visa-versa for southern hemisphere installation.
3. Solar Panel Maintenance: Use soft, wet cloth to clean the solar panel
periodically (at least once a one year) to avoid energy output reduction
resulted from accumulated dust. Clean accumulated snow ASAP during
snowing season.
eLEDing, EE812W-AI8 & EE824W-AI18
AI SMART Solar Powered Area CREE LED Lights
When
night
comes
Auto convert to
Dimming mode
Motion Dusk to Dawn with
detected dimming brightness
Critical Reserve
Motion
(10% left)
No
Light OFF
link: https://youtu.be/6NUnVgGdHG4)
In most cases, occur
on continuous
cloudy/snowing
days during the
winter season
Yes
ON with half
brightness
After Fully
Charged
Rev: 05017021