EE Systems Group FUNLIT Waterproof Quick Start Manual

FUNLIT
™
Waterproof

Product Description

At EESGI, we are dedicated to provide our customers with environmental-friendly user experiences
and joyful lifestyle. The RGB LED solar FUNLIT, Model: EE801RGB is an innovative full color
illuminator with outstanding performance and well-built quality. Driven by eLEDing's advanced solar-
powered management technology, this product can satisfy customers' different requirements in
different scenarios and environment, especially holidays & festivals celebration activities and
indoor/outdoor decoration.
This product has three lighting options: all-night-long dusk-to-dawn illumination, manual selection, or
using 2.4 G remote control (optional) to set up multiple-lights illumination. Users are allowed to
customize the combination of colors, timing options and light sequences based on their own
preferences. This well-designed and easy-to-carry product can be used for both residential and
commercial decoration in different locations, such as gardens, beaches, patio, outdoor dining, bars &
party, and even swimming/ground pools! Our multicolor LED light will offer every customer with
unique living experiences and delightful life style.

First Time Activation

First and foremost, every product is fully charged before shipped out. However, if the light was stored
for a long-time, it needs to be fully charged before use. Properly place the light to ensure the solar
panel will receive maximum exposure to direct sunlight. It is essential that the panel can receive 4-5
hours of direct sunlight every day in order to ensure the all-night-long performance. If the battery level
gets too low, the light will shut down automatically until the battery is recharged. Click the control
button (see the picture in Page2 as reference) to activate the light during the nighttime or in darkness. If
testing or first-time set up is conducted during daytime or under daylight condition, please place the
solar panel side downward, otherwise the build-in sensor will detect the ambient light level above
minimum daylight condition then stop illuminating. Once the light is activated, it will work under Dusk
to Dawn profile for daily basis.

Manual Setting

This FUNLIT has seven different color options (red, pink, green, blue, light blue,
yellow, and white) and four color-changing mode (flash, strobe, fade, and smooth).
By pressing the switch button, users can choose their preferred color and color-
changing mode. When nighttime comes, if the light is fully charged during daytime, it
will light up automatically with preset illumination settings.

Remote Control

Within 30 feet, remote control works for as many FUNLIT units as it faces. For every unit, it
must be activated by pressing ON button individually before first-time using remote control
By pressing the ON/OFF button to turn on/off the lights manually via remote control
By pressing the color button, all the lights will illuminate with same color