Displaying The Memory Viewer Screen; Playing The Pictures; Executing The Slide; Termination Of The Memory Viewer - Panasonic PT-VW360D Operating Instructions Manual

Displaying the Memory Viewer screen

1) Press the <MEMORY VIEWER/USB DISPLAY/NETWORK> button on the remote control or switch the
input source to MEMORY VIEWER.
f Press the <INPUT SELECT> button on the control panel and select the input source in the input guide.
2) Attach the USB memory firmly into the <USB A (VIEWER/WIRELESS)> terminal.
f The standby screen "please press ENTER" is displayed while the USB memory icon is displayed at the
lower left of the screen.
f When the partition are separated in USB memory, several USB icons will be displayed.
3) Press the <ENTER> button on the remote control.
f The root directory of the USB memory will be displayed in thumbnail on the screen.

Playing the pictures

1) Press asqw on the remote control to select a file you want to play on the memory viewer screen.
2) Press the <ENTER> button on the remote control.
f The picture will display on the full screen.
3) Press w to switch to the next picture, press q to return to the previous picture.
4) Press the <ENTER> button on the remote control.
f Return to the thumbnail screen.
Note
f When the recorded number of pixels is smaller than the maximum number of display dot
aspect ratio.
f When the recorded number of pixels is larger than the maximum number of display dot
ratio.
f When the recorded number of pixels is the same as the maximum number of display dot
degradation of image quality can be reduced.
*1 The maximum number of display dot for each product is as follows.
PT-VW360D and PT-VW360T: 1 280 x 800
PT-VX430D and PT-VX430T: 1 024 x 768

Executing the slide

All the still images in the same folder will be played continuously according to the setting of [NETWORK/USB]
menu → [MEMORY VIEWER LIGHT].
1) Press asqw on the remote control to select a file.
2) Press the <MENU> button to select the [MEMORY VIEWER LIGHT] → [SET SLIDE].
3) Press the <ENTER> button on the remote control.
f The slideshow will start.
f Press the <ENTER> button to return to the thumbnail screen.
Note
f If you press the <MENU> button during playback in the slideshow, the playback will stop and a menu displays. The playing will continue
when the menu disappears.

Termination of the Memory Viewer

1) Press asqw to select the thumbnail
2) Press the <ENTER> button on the remote control.
f Return to the standby screen "please press ENTER".
Note
f You can also exit the Memory Viewer by switching to the input other than MEMORY VIEWER.
88 - ENGLISH
Chapter 5 Operation of Function - Memory Viewer function
, it will be displayed enlarged maintaining the
*1
, it will be displayed reduced maintaining the aspect
*1
, it will neither be enlarged nor reduced, so
*1
which is displayed on the upper left corner.