Table of Contents
Advertisement
Attaching the lens cap
When moving this projector or while not using it over an extended period of time, it is recommended to attach the
lens cap to avoid contaminating the lens.
To prevent loss of the lens cap, please attach the lens cap with the string of accessories according to the following
procedures.
1)
Thread the thinner end of the string through the hole on the lens cap.
2)
Thread the other side (the side with larger ring) of the string through the hole at the bottom of the
projector and fasten it.
Chapter 1 Preparation - Attaching the lens cap
(ii)
(i)
Lens cap
String
ENGLISH - 25
Advertisement
Chapters
Table of Contents
