Control Direction Test - Horizon Hobby Bind-N-Fly AS3X UMX A-10 Instruction Manual

EN

Control Direction Test

You should bind your aircraft and transmitter
before doing these tests.
Move the controls on the transmitter to
make sure the aircraft control surfaces
move correctly and in the proper direction.
Make sure the tail linkages move freely
and that paint or decals are not adhered
to them.
8
Transmitter
Command
Arrows indicate the direction of the trailing edge of the control
surface.
Aircraft Reaction
Down
Elevator
Up
Elevator
Right
Roll
Left
Roll
Right
Rudder
Left
Rudder