Samsung NX58K9500W Series User Manual page 57

CAUTION Do not use the surface burners while the gas oven is performing a self-cleaning cycle.
To delay starting the self-cleaning cycle
2
1. Repeat steps 1 and 2 on the previous page.
2. Press the Delay Start button. The oven door locks.
3. Set the time you want the oven to start self-cleaning using the number pad.
4. Press the START/SET button. The oven will start self-cleaning at your specified time.
To cancel the self-cleaning cycle
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in the oven. To turn
off the self-cleaning cycle, press the OFF/CLEAR button. The cycle turns off, but the door remains
locked and the Lock icon blinks until the oven temperature falls below 392 °F (200 °C).
After self-cleaning
• The door stays locked until the internal oven temperature falls below 392 °F.
• When the oven has cooled down, wipe the oven surfaces with a cloth to remove ash residue.
• Stubborn stains can be removed using a steel-wool pad. Lime deposits can be removed using a
vinegar-soaking cloth.
• If you are not satisfied with the cleaning results, repeat the cycle. "HOT" appears on the display
until the oven cools down. Wait until the message disappears, and start a new cycle.
CAUTION Do not attempt to open the oven door immediately after the self-cleaning cycle
is complete. The oven is still very hot when the door unlocks. Escaping hot air and/or steam
could burn you.
English - 57
3
4