Storage And Maintenance; Customer Service Contact Information - Innova ITM5900 Owner's Manual

Remove Safety Pin (26) from the tip of the Base Frame
(8&9). Pull up on the Handlebars (6/7) to fold the Base
Frame (8&9). Re-insert Safety Pin into the hole near the tip
of the Base Frame (9).
Be sure to leave the Base Frame (8&9) wide enough to
remain stable or secure it to a wall to prevent tipping.
There are other storage options for this inversion table. Be
sure the inversion table is stored safely and make sure it
does not slam, fall, or tip over. Contact us for other storage
options.
WARNING: Do not allow anyone to use the inversion
table while it is in storage mode. Use the inversion table
only when the base frame is fully extended. Be sure all
parts of the inversion table are not left unstable (easily
moved) when not in use. Be sure the device is completely
secured to prevent tripping or blocking.
NOTE: Use a lock (NOT included) to secure the Height
Adjustment Tube (3) to the Cross Bar (12) to prevent
unauthorized usage of the inversion table.
To CLEAN, wipe your inversion table with a
damp cloth. DO NOT use abrasive cleaners or solvents.

Customer Service Contact Information

1289 Hammerwood Avenue, Sunnyvale, CA 94089
When contacting customer service, please provide the following information:
1) Model Number for your item
2) PC Code for your item (front page of this manual)
3) Part number or installation step number in question
http://innovaproductsinc.com/innova5900/
or search "Innova ITM5900 Installation Guide" on YouTube.com
Installation Guidance Video DOES NOT replace Owner's Manual.
Please be sure to read the Owner's Manual in its entirety.
STORAGE & MAINTENANCE
To Store, Insert the Safety Pin (26)
at tip of right Base Frame (9R)
Innova Products Inc.
Email: support@innovaproductsinc.com
Phone: (408) 541-1866
www.innovaproductsinc.com
8
© Copyrighted 2013-2020 Innova Products Inc.
9
9