Storage & Maintenance - Innova ITM4800 Owner's Manual

Remove Safety Pin (26) from the tip of
the Base Frame (8&9). Pull up on the
Handlebars (6/7) to fold the Base Frame
(8&9). Re-insert Safety Pin into the hole
near the tip of the Base Frame (9).
Be sure to leave the Base Frame (8&9)
wide enough to remain stable or secure it
to a wall to prevent tipping.
There are other storage options for this
inversion table. Be sure the inversion
table is stored safely and make sure it
does not slam, fall, or tip over.
WARNING: Do not allow anyone to
use the inversion table while it is in
storage mode. Use the inversion table
only when the base frame is fully
extended. Be sure all parts of the
inversion table are not left unstable
(easily moved) when not in use. Be sure
the device is completely secured to
prevent tripping or blocking.
NOTE: Use a lock (NOT included) to
secure the Height Adjustment Tube (3) to
the Cross Bar (12) to prevent
unauthorized usage of the inversion
table.
To CLEAN, wipe your inversion table with
a damp cloth. DO NOT use abrasive
cleaners or solvents
STORAGE & MAINTENANCE
9
8
9
To Store, Insert the Safety
Pin (26) at tip of right
Base Frame (9R)
9
16