Samsung WW22N6850QX User Manual page 34

Operations
04 Spin
05 Soil
06 Extra Rinse
07 Delay End
08 My cycle
34 English
Press to change the spinning speed for the current cycle.
• Extra High: Extends the spinning process to effectively remove
moisture from the load.
NOTE
Extra High uses a stronger spinning process to remove
moisture, so it is not suitable for wrinkle-free or no-iron fabrics,
or overloads.
• High: Underwear, t-shirts, jeans and sturdy cottons.
• Medium: Jeans, wrinkle-free or wash-and-wear items and
synthetics.
• Low: Delicate items that requires a lower spinning speed.
• No Spin: The drum does not spin after the final drain process.
• Rinse Hold (No lamp turns on): The final rinse process is
suspended so that the laundry remains in the water. To unload
the laundry, run a drain or spin process.
NOTE
Spin Only: This cycle runs a spin cycle only. Press and hold Spin
for 3 seconds. With the cycle time on the display, press Spin
repeatedly until a desired spinning speed is selected. Then, press
Start/Pause (Hold to Start) to start the cycle.
This cycle is available only when no specific cycle is selected
Press the button to select the soil level/washing time.
• Extra Heavy: For extremely soiled loads.
• Heavy : For heavily soiled loads.
• Normal: For moderately soiled loads. This setting is best for
most loads.
• Light: For lightly soiled loads.
• Extra Light: For barely soiled loads.
Press this button to add an additional rinse at the end of the cycle
to remove laundry additives more thoroughly.
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine's internal logic. For example, this setting is useful
for programming your machine to finish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
• Choose your favorite cycle including temperature, spin, soil
level, options, etc. (see page 40)