Table of Contents
Advertisement
en Basic operation
13.2 Setting a programme
Set the programme selector to the
1.
required programme.
→ "Programmes", Page 27
If necessary, adjust the pro-
2.
gramme settings → Page 40.
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 40
Adjust the programme settings.
▶
→ "Programmes", Page 27
Please follow the information about
operating logic.
Notes
¡ The programme settings are not
saved permanently for the pro-
gramme.
¡ The setting is saved if you activate
or deactivate the intelligent dosing
system.
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡ A programme has been set.
¡ The programme settings have
been adjusted.
40
Press and hold
▶
seconds.
Press
to call up the saved pro-
gramme.
Note: To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the
→ "Programmes", Page 27.
Requirement: The laundry is pre-
pared and sorted.
→ "Laundry", Page 36
Open the door.
1.
Make sure that the drum is empty.
Load the laundry unfolded into the
2.
drum.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
for approx. 3
Advertisement
Table of Contents
