Usb Configuration - Asus RS300-E8 Series User Manual

5.4.6

USB Configuration

This allows you to make changes on the configuration settings of the USB.
Advanced
USB Configuration
USB Devices
1 Mouse,2 Hubs
Legacy USB Support
USB3.0 Support
XHCI Hand-off
EHCI Hand-off
USB Mass Storage Driver Support
Port 60/64 Emulation
USB hardware delays and time-outs:
USB transfer time-out
Device reset time-out
Device power-up delay
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
Allows you to enable or disable the support for legacy USB devices. Setting to [Auto] allows
the system to detect the presence of USB devices at startup. If detected, the USB controller
legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
USB3.0 Support [Enabled]
Enables or disables the USB3.0 (XHCI) controller support.
Configuration options: [Disabled] [Enabled]
XHCI Hand-off [Disabled]
This functions as a workaround for OSes without XHCI hand-off support.
Configuration options: [Disabled] [Enabled]
EHCI Hand-off [Enabled]
This functions as a workaround for OSes without EHCI hand-off support.
Configuration options: [Disabled] [Enabled]
USB Mass Storage Driver Support [Enabled]
This allows you to enable or disable the USB Mass Storage driver support.
Configuration options: [Disabled] [Enabled]
Port 60/64 Emulation [Enabled]
This allows you to enable the I/O port 60h/64h emulation support. This should be enabled for
the complete USB keyboard legacy support for non-USB aware OSes.
Configuration options: [Disabled] [Enabled]
5-20
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[20 sec]
[20 sec]
[Auto]
Enables Legacy USB
support. AUTO option
disables legacy support
if no USB devices are
connected. DISABLE option
will keep USB devices
available only for EFI
applications.
Chapter 5: BIOS Setup