2.1
Chassis cover
2.1.1
Removing the rear cover
1.
Locate and remove the front side screws.
2.
Loosen the two thumbscrews on the rear panel to release the rear cover from the
chassis.
3.
Firmly hold the cover and slide it
toward the rear panel for about half
an inch until it is disengaged from the
chassis.
4.
Lift the cover from the chassis.
5.
To recover the rear cover, reverse
step 1 to 4.
A protection film is pre-attached to
the system cover before shipping.
Please remove the protection film
before turning on the system for
proper heat dissipation.
2-2
Front side screw
Thumbscrews
Chapter 2: Hardware Information