Table of Contents
Advertisement
Service Manual
Service Manual
Model No:
Chapter 6: MAINTENANCE SERVICE AND TROUBLE SHOOTING
6-1. Trouble alarm and solve method
The display shows F2.
The display shows EL.
Note: when the digital tube displays the abnormal symbol during working,it buzzs once in succession every two minutes,then the
power will be cut automatically after ten minutes
phenomena
●The spinning is intermittent when it starts.
●The wash procedure is paused.
●Push the PROGRAM button to select SPIN,but it
doesn't work.
●The pulsator pauses during water inlet in wash and
rinse.
●There may be some water flowing out of the drain
hose in the first use of the machine.
520-MABE1789
Is the drain hose set too low?
FA
Is the water level too high?
Is the laundry too much？
The height of the end of the drain hose
should be between 800mm-1200mm
Please contact Customer Care.
Put part of the laundry out,then
push the Start/Pause button.
●Balance the laundries to avoid slanting
●The cloth sensor is checking the cloth,it will add water after 48
seconds.
●The program is setting the drain time. Some time is needed before it
starts spinning.
●It is to avoid splashing during water inlet.
●It is the water remained in the factory inspection of performance.
16
Issue
Rev.
if
Push
Exlpalanation
Advertisement
Table of Contents
