Canon LEGRIA HF R806 Instruction Manual page 265

Trouble?
Unable to complete WPS. Try the operation again.
- Some access points require pressing and holding the Wi-Fi Pro-
tected Setup (WPS) button. For details, refer to the instruction
manual of your access point.
- Make sure to touch [OK] on the camcorder's screen within
2 minutes of activating the Wi-Fi Protected Setup signal on the
access point, whether by pressing the button or by entering the
PIN code.
Unable to connect to the Connect Station.
- An error occurred while trying to pair the camcorder with the
CS100 Connect Station. Check that the connect station is ready
to establish a connection and carefully hold the camcorder close
to the connect point on the connect station again (A 188).
Unable to connect to the server
- The camcorder could not access the external server used for the
Monitor while Out function. Make sure the access point is correctly
connected to the Internet.
- Check that 1
and time.
Unable to connect
- To avoid interference, use the camcorder at some distance from
devices that emit electromagnetic waves (cordless phones, micro-
wave ovens, etc.).
> q >
[Date/Time] is set to the correct date
265