Canon LEGRIA HF R806 Instruction Manual page 180

The Camcorder's Wi-Fi Functions
To register the camcorder's ID in the CameraAccess plus app
1
Android devices compatible with NFC: Connect the cam-
corder and the device.
• Perform only step 1 in
device (A 176).
• Android device: When the camcorder's ID is correctly registered,
a message will prompt you to turn off Wi-Fi on the device. Select
Turn off Wi-Fi or Do not turn off Wi-Fi (to keep using Wi-Fi on
the device) and then touch Set.
• Camcorder: After the Wi-Fi connection to the Android device is
terminated, the camcorder will reconnect automatically to the
previously selected access point.
• The rest of this procedure is not necessary. Continue as
described in
iOS/Android devices not compatible with NFC: On the
device, turn on Wi-Fi and select the same access point as
that to which the camcorder is connected (step 5 in the pre-
vious procedure).
2
Start the CameraAccess plus app and touch Setting and
then Start.
• The camcorder's ID is registered and displayed in the CameraAc-
cess plus app.
3
Touch Finish and close the CameraAccess plus app.
• Disconnect the iOS/Android device from the access point.
Pairing an NFC-compatible Android
To use the Monitor while Out function
180
(A 181).