Installation - Panasonic CV-CFN203L User Manual

3 Installation

Important

Before the installation, please make sure the installation surface can sustain at
least 3X weight of the bracket and the camera.
Step 1
Rotate the enclosure to align the arrow on the enclosure edge with the arrow on the pedestal
edge; press inward according to the arrow location of the enclosure and meanwhile push
outward according to the arrow location of the pedestal to separate the concave; pull the
enclosure to make it break away from the pedestal.
Step 2
Confirm the installation location and dig holes on the installation surface.
Step 3
Use tools to insert expansion bolts into the installation holes and fix them firmly.
Step 4

Adjust pedestal location (if it is side cable outlet, then pull the cable through the side outlet
cable slot).

Align the bolt fixing holes of the device pedestal with the expansion bolt fixing holes of the
installation surface; insert the self-tapping screws into the expansion bolts and fasten
them firmly to fix the pedestal on the installation surface (if it is top outlet, pull the cable
through the outlet hole on the installation surface after the pedestal is fixed firmly).
Figure 3-1
4