Siemens WM16XMH9GB User Manual And Assembly Instructions page 55

Fault
The programme does not
start.
The door cannot be opened.
The water is not draining.
Water is not flowing in. De-
tergent is not being dis-
pensed.
Cause
⁠ is activated.
The temperature is too high.
Water level is too high.
Power failure.
Drain pipe or water outlet
hose is blocked.
Drain pipe or water drain
hose is caught or jammed.
Drain pump is blocked.
⁠ is activated.
The water outlet hose is con-
nected too high.
Pump cover is not correctly
assembled.
Pump cover is not correctly
assembled.
You have not pressed Start/
Reload.
www.devicemanuals.eu
Troubleshooting en
troubleshooting
Press Start/Reload to start the pro-
4.
gramme.
Continue the programme by select-
▶
ing Spin or Drain and pressing
Start/Reload.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 38
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 38
Start the Drain programme.
▶
Open the door using the emergency
▶
release.
→ "Emergency release", Page 60
Clean the drain pipe and the water
▶
outlet hose.
Ensure that the drain pipe and wa-
▶
ter drain hose are not kinked or
trapped.
→ "Cleaning the drain pump",
▶
Page 47
Continue the programme by select-
▶
ing Spin or Drain and pressing
Start/Reload.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 38
Install the water outlet hose at a
▶
maximum height of 1 metre.
→ "Technical specifications",
Page 64
Correctly assemble the pump
▶
cover.
Correctly assemble the pump
▶
cover.
Press Start/Reload.
▶
55