Section 3. Charging Your Swagtron ® Eb-6 E-Bike - SWAGTRON E-BIKE EB-6 User Manual

Section 3. Charging Your SWAGTRON
WARNING: Ensure the E-Bike is turned off before charging and remains off
while charging.
Step 1. Connect the charging adapter and cable together then turn the
rubber cap covering the charging port.
Step 2. Insert one end of the charging cable into the charging port and
connect the other end to a wall outlet.
Step 3. Allow at least 5 hours when charging for the fi rst time. After this
initial charge, average charging time is 4-5 hours.
Step 4. While the E-Bike is charging, the adapter's indicator light will turn
red.
Step 5. When the E-Bike is fully recharged, the adapter's indicator light will
turn green. You may then disconnect the E-Bike from the charger.
How to Detach the Battery
For your convenience, the EB-6's battery can be removed for easier
charging and/or an extra measure of security.
Step 1. Open the latch under the seat, remove the seat from the seat post
and set it aside.
Step 2. Use the included keys to unlock the battery via the keyhole near the
charging port (fi g.7). To unlock the battery, insert the key, push it
in, and turn it counterclockwise to the UNLOCK position.
NOTE: You must push the key in and turn it at the same time.
8
ENGLISH
®
EB-6 E-Bike
fi g.6
fi g.7
SWAGTRON EB-6 20" Electric Bike