Valcom VIP-428A Quick Start Manual

IP PoE SPEAKER WITH SQUARE FACEPLATE
INTRODUCTION
The VIP-428A IP PoE Speaker with Square
Faceplate enables voice access to a single zone of
paging over an IP-based LAN/WAN. This allows a
page zone extension anywhere on the network.
The enclosure is made of steel with a durable white
powder coated finish. The color of the enclosure
can easily be changed to match any decor. Power
is provided to the Vip-428A via a Power over
Ethernet (PoE) switch meeting the 802.3af
specification.
SPECIFICATIONS
Access Methods

PBX, FXO Port w/VIP-801x

POTS telephone set w/VIP-801x

PBX, FXS Port w/VIP-802x

Valcom M Cast Page Group

SIP telephone system
Features

Single RJ-45 network connection

Power over Ethernet (PoE) 802.3af compatible

High Efficiency Class-D Amplifier

Software Volume Control
DIMENSIONS/WEIGHT

11.5" H x 11.5" W x 3.7" D
(29.2 cm x 29.2 cm W x 11.4 cm)

Weight: 4.25 LBS (1.91 kg)
Environment
Temperature:
Humidity:
PSE (Power Sourcing Equipment) to be compliant
to IEEE 802.3af
VIP-428A
0 to +40° C
0 to 85% non-precipitating
Packing List
Qty.
1
1
INSTALLATION
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates, uses
and can radiate radio frequency energy and if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference in which case
the user will be required to correct the
interference at his own expense.
1
Issue 1
Item
VIP-428A
VSP Document
947808