Connecting Your Audio-Video Equipment With Component Output - Canon LV-7370 User Manual

Connecting Your Audio-Video Equipment with Component Output

Use audio equipment for stereo sound.
Optional 15-pin - to - rCa (female)
 3 cable (lV-Ca32)
Component video rCa  3
cable (not supplied)
A component signal will be automatically displayed. If not, from the menu, select [Setup] → [Options(1)] → [Input
signal select] or [Computer 2 (Analog)] → [Computer 1], and then select [COMPONENT].
• Select the input name for its appropriate input connector after turning on the projector.
Input connector
ANALOG IN-1
DIGITAL IN /
ANALOG IN-2
NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements.
ANALOG IN-1
Y Cb Cr L R
Component AUDIO OUT
Use the INPUT button on the projector cabinet or the remote
control to select the appropriate input from the menu.
. Installaton and Connectons
AUDIO IN
audio cable (not supplied)
AUDIO IN
L
Computer 1
Computer 2 (Analog)
9
R