Buffalo Benelli Classica Series Instruction Manual page 4

Always remove battery from Benelli by Buffalo Corp eBike before working on the bicycle or if
you transport the bike by car or plane. Accidental activation of the bicycle drive system can
result in serious injury.
Battery pack and charger contain regulated materials and must be dispose in accordance with
national and/or local laws. Do not discard the battery and charger into fire, water or ordinary
household waste/garbage. Take to a waste facility or recycler.
The battery of this bicycle is subject to transportation regulations for handling hazardous
materials. The battery must be removed before flying and may be subject to special handling
by the carrier.
Failure to observe these warnings can result in electrical fires, explosion, or severe burns or
electrocution.
YOU CAN BE YOU SERIOUSLY INJURED, PARALYZED OR
KILLED IF YOU IGNORE THESE WARNINGS.
Do not make any modifications to your Benelli by Buffalo Corp.
Do not sit on the bicycle with the kickstand down. Kickstand is not designed to support the
weight of a person. Make sure kickstand is up before riding.
Do not misuse the electric bike by riding it without a saddle. If the saddle gets stolen, it may
lead to hazardous situations when still riding on the electric bike without a saddle.
If you purchased the Classica26, do not overload the rear rack.
The maximum allowable weight for the rear rack is 40 lbs.
Correct tightening force on fasteners (nuts, bolts, screws) on your
bicycle is important. If too little force is applied, the fastener may not hold securely. If too
much force is applied, the fastener can strip threads, stretch, deform or break. Either way,
incorrect tightening force can result in component failure, which can cause you to lose control
and fall.
Please read and observe the safety warnings and instructions enclosed in the operating
instructions of the battery pack as well as in the operating instructions of your Benelli by
Buffalo Corp eBike.
4