Buffalo Benelli Classica Series Instruction Manual page 15

should you attempt to repair damaged parts. This can lead to accidents. Replace defective
parts before you ride the bike again.
Accidents do happen. If you are involved in an accident or crash, have your bike checked by a
professional bike workshop before riding it again. If defects on the frame or components go
unnoticed this can lead to accidents. If your bike does not roll forwards easily in a straight line,
this could mean that the frame is warped. In this case, have the steering stability checked by a
professional bike workshop.
Headset
The headset is the bearing for the bike fork in the frame. If the headset has been properly
adjusted, it will turn easily. In doing so, no play should be evident.
The headset is subject to a large amount of stress due to impacts with the road surface. This
can cause it to come loose or affect its setting. Have the play and ease of movement of the
headset checked regularly by your specialist cycle shop
could cause breakages. This should therefore always be carried out by a professional bike
workshop. If you ride with the headset loose, this could damage the bearing shells or fork.
Fork
The front wheel is held in place by the bike fork. The bike fork
consists of two fork blades, the fork crown and steering tube.
They can be adjusted in different ways and provide a greater
degree of riding comfort.
Specific information on your suspension fork is provided in the
manufacturer's operating instructions which you can find on the CD or the manufacturer's
website.
Never ride your bike if the frame is warped or cracked. On no account
If you do not adjust the headset properly or tighten it too tightly, this
15