Buffalo Benelli Classica Series Instruction Manual page 18

TIRES
A large number of different tire types exist. The bike's off-road capability and rolling resistance
depend on tread profile.
otherwise it may burst.
Inflate the tire at least to the specified minimum air pressure. If the tire pressure is too low, the
tire may detach from the rim.
minimum permissible pressure, can be found on the tire sidewall.
profile as otherwise the ride characteristics may be adversely affected. This can lead to
accidents.
of the tire sidewalls regularly. Replace worn tires before using the bike.
NOTE: Note the dimension of the fitted tire. Standard designations are used when stating
the tire dimension.
CLASSICA28 comes with 28" tire and tire width about 1.57"
CLASSICA26 comes with 26" tire and tire with of 1.5"
The inner tube maintains the pressure inside the tire. It is inflated via a valve. Three valve
types exist:
Only inflate the tire to the maximum permissible tire pressure as
The maximum permissible tire pressure, and normally also the
Always replace the tire with a tire of the same type, dimension and
Tires are wear parts. Check the tread depth; tire pressure and condition
18