Installing the wind baffle
If you operate the cooling operation of air conditioner in the condition where ambient temperature is lower than 23 °F
DB(Dry bulb), or the outdoor unit might be faced with strong wind directly, the wind baffle should be installed to prevent the
outdoor unit fan from operating in reverse way.
❋ Wind baffle is not supplied with the product.
Make holes on both sides and attach the
wind baffle using screws.
• When attaching the wind baffle using screws, be careful that the screws do not damage the partition and the
heat exchanger.
CAUTION
• Install outdoor units with the back surface facing wall side to eliminate the effects of external wind.
NOTE
Make holes on both sides and attach the
<Front View>
"A"
<Top Down View>
"A" – Should be 7 7/8 inch or longer
wind baffle using screws.
"A"
Partition
24.6 inch
0.63 inch
35