Table of Contents
Advertisement
Useful Functions
Using the HDMI Link Function
HDMI Link Function
When an AV device that meets the HDMI CEC standards is connected to the projector's HDMI port, you can
perform linked operations such as linked power on and volume adjustment for the AV amplifier from one
remote control.
c
•
As long as the AV device meets the HDMI CEC standards, you can use the HDMI link function even if
the AV amplifie in-between does not meet the HDMI CEC standards.
•
Up to 2 multi-media player that meets the HDMI CEC standards can be connected at the same time.
Connection Example
Projector
HDMI Link Settings
When HDMI Link is set to On, you can perform the following
operations.
Settings - HDMI Link - HDMI Link
s
•
Input Change Link
Switches the input source of the projector to HDMI when
content is played back on the connected device.
•
Connected Devices Operations
Using the projector's remote control, you can perform op-
erations such as Play, Stop, Fast Forward, Rewind, Next
Chapter, Previous Chapter, Pause, Volume Adjustment, and
Audio Mute.
You can also select the following functions from the HDMI
Link screen.
Function
Audio Out Device
Power On Link
Selects which device outputs audio.
Projector: Select this to output audio from the projector's built-in speakers or from an
external speaker connected to the Audio Out port.
AV System: Select this to output audio from an AV amplifier that supports the HDMI
CEC standards.
When Power On Link is set, operations are linked as shown below.
•
When the projector is turned on, the connected devices are also turned on.
•
Also, when the connected devices are turned on and content is played back, the projector
turns on.
Amplifier
p.46
Explanation
42
Multi-media players and so on
Advertisement
Table of Contents
