Overview Ensure that the appliance is functioning correctly. If the TOC control operates again, the appliance should be checked by a Please read this guide carefully and retain for future use competent electrician. and maintenance. The heater carries a ‘Do Not Cover’ label to warn the user that if the appliance is covered, there is a risk of This appliance has been designed and manufactured to overheating.
Time Prog SET TIME SET PROGRAMME PRESS AND HOLD PRESS AND HOLD FOR 5 SECONDS FOR 5 SECONDS MODE SELECTION EMPERATURE SET BOOST, MANUAL, Temp Mode WHEN DISPLAY SHOWS SETBACK AND ROOM TEMPERATURE, PROGRAM PRESS TO ADJUST 1. Basic Operation 5.
Page 5
8. Set 7-day programme An example of one day programme on HSPSSE PROGRAM 1 PROGRAM 2 PROGRAM 5 PROGRAM 6 PROGRAM PROGRAM ºC 19ºC 22ºC 22ºC 16ºC 10ºC 4ºC 06:00 08:00 12:00 14:00 16:00 22:00 Logic diagram for setting programme on HSPSSE Press and hold PROG for 5 seconds to enter the PROG TEMP...
Page 6
13. Open Window Detection 16. Mounting Ensuring you don’t waste energy on heating the outside To wall mount, the wall bracket supplied must be used. world, the heater is equipped with optional open / Please refer to illustrations in Fig.1. closed window detection.