Storage; Adjusting Suction Power - Philips FC9306/02 Manual

2 To switch on the appliance, press the on/off button on top of the
appliance.
Tip: To avoid bending your back, press the on/off button with your foot.
3 To switch off the appliance, press the on/off button on top of the
appliance.

adjusting suction power

1 During vacuum cleaning, you can adjust the suction power with the
selection wheel on top of the appliance.
- Use maximum suction power to vacuum very dirty carpets and hard
floors.
- Use moderate suction power to vacuum carpets.
- Use minimum suction power to vacuum curtains, tablecloths etc.
pausing during use
1 If you want to stop vacuum cleaning for a moment, press the on/off
button on top of the appliance to switch off the appliance
2 Insert the ridge on the nozzle into the parking slot to park the tube
in a convenient position.
3 To ensure stable parking of the telescopic tube, adjust the tube to
the shortest length.
4 To continue vacuum cleaning, simply press the on/off button on top
of the appliance to switch on the appliance.

storage

This vacuum cleaner has not one, but two carrying handles. When it is on
its wheels, there is a handle on top which enables you to easily move the
cleaner around with very little bending. The second handle on the front
side of the appliance enables you to comfortably carry it around in an
upright position.
1 Switch off the appliance and remove the mains plug from the wall
socket.
2 Press the cord rewind button to rewind the mains cord.
English
9