Refitting The Door; Adjusting The Height Of The Door - LG GSD665BSL Owner's Manual

6
Lift the upper hinge fixed between the
appliance and the appliance door and then
remove it.
Upper hinge
Door
7
Remove the freezer and fridge compartment
door by lifting it upward. At this time, the
door should be lifted enough for the steel
pipe to be completely pulled out.
NOTE
• When moving the freezer door, be careful not to
damage the water tubes. The doors should be
laid down on a blanket in a safe area once they
have been removed.
• If the water tube end is damaged, it should be
trimmed to ensure it does not leak when refitted.

Refitting the Door

Mount them in the reverse sequence of removal
after the appliance is passed through the access
door.
14
Adjusting the Height of the
Door
If the door of the appliance is not level, adjust the
difference in the height of appliance door using the
following method.
NOTE
• Because the hinge pin may falll out, do not
adjust the height of the appliance door more
than 5 cm.
[Method 1]
* Reference
Keeper nut
Adjustment hinge pin
Spanner
1
Loosen the keeper nut by rotating it
counterclockwise using a 19 mm spanner.
To loosen
the nut
2
Adjust the difference in the height of the
appliance door by rotating the adjustment
hinge pin clockwise or counterclockwise with
an 8 mm spanner.
Up
Down