LG GSD665BSL Owner's Manual page 24

Notes for Use the Control Panel
• The control panel will turn on in any of the
following cases.
– When the power is turned on
– When a button is pressed
– When the appliance door (fridge
compartment, freezer compartment, Door in
Door) is opened
• The control panel will turn off automatically for
energy saving in any of the following cases.
– When one minute has passed after turning
on the power
– When no button operation is carried out for
20 seconds after a desired button is pressed
– When 20 seconds has passed after the
appliance door (fridge compartment, freezer
compartment, magic space) is opened and
closed
•
panel while cleaning it, the button function may
operate.
Setting the Temperature
This sets the fridge temperature or freezer
temperature.
• Press the Fridge button or Freezer button to
adjust the temperature.
• The temperature can be adjusted.
− Fridge : from 1 °C to 7 °C
− Freezer : from -14 °C to -24 °C
• The actual inner temperature varies
depending on the food status, as the indicated
setting temperature is a target temperature,
not actual temperature within the appliance.
NOTE
• Wait until two or three hours have passed after
connecting the appliance to the outlet before
storing food in the appliance.
• The appliance can automatically detect
problems during the operation.
• If a problem is detected, the appliance does not
operate and an error code is displayed even
when any button is pressed.
• When this occurs, do not turn off the power and
immediately contact an LG Electronics customer
information centre. If you turn off the power,
the repair technician from the LG Electronics
customer information centre. It may have
24
Setting Express Freeze
The function can quickly freeze a large amount of
ice or frozen foods.
• When you press the Express Freeze button, the
Express Freeze icon lights on the control panel.
• The function is enabled and disabled in turn
each time you press the button.
• The Express Freeze function automatically
Setting and Resetting Lock
This locks the buttons on the control panel.
• When you press the Lock button for three
seconds, the set/reset icon on the control panel
lights. The function is enabled and disabled in
turn each time you press the button.
• If you press a button other than Lock when the
child lock is set, the button will not function.
• When you press a button other than Lock when
the child lock is set, the set/reset icon on the
•
for three seconds to disable the function.
Setting Pure N Fresh (Optional)
Bacteria and odor inside the appliance can
be minimized with the Pure N Fresh function.
However, the function is only effective for bacteria
onto food.
Setting Wi-Fi
The Wi-Fi button, when used with the LG Smart
ThinQ application, allows the refrigerator to
connect to a home Wi-Fi network.
• The Wi-Fi icon shows the status of the
refrigerator's network connection. The icon
illuminates when the refrigerator is connected
to the Wi-Fi network.
• Press and hold the Wi-Fi button for 3 seconds
to connect to the network. The icon blinks
while the connection is being made, then turns
on once the connection is successfully made.
Lock button