Table of Contents
Advertisement
4.5
Alarm
M
1. Press the
button and the menu bar will pop up.
<
2. Press the
LEFT button or
O
3. Press the
+
4. Press the
UP button or
O
+
and
UP or
default setting is Alarm OFF.)
5. If an alarm time is selected
alarm time is reached, the parent unit will beep about every 10 seconds
and flash the alarm icon, until any button is pressed.
4.6
Camera Control
4.6.1
Add (pair) a camera
M
1. Press the
button of the parent unit and the menu bar will pop up.
<
2. Press the
LEFT button or
O
then press
+
3. Press the
UP button or
OK button to confirm.
cam 1
4.
/
-
or
DOWN button to select the desired Camera and press the
button to start searching for a camera unit. The green ON / OFF LED will
flash rapidly while searching.
5. Press and hold the PAIR button underneath the baby unit until the parent
unit finds the camera, beeps and the video from the camera appears.
NOTE
You can only register a new camera to a camera number that is not already
paired.
Paired camera numbers are indicated by a *, such as cam*1.
If the camera being paired was registered previously, it will lose the old
registration when it is paired again.
16
>
RIGHT button until
button to show the alarm Off / On setting.
-
DOWN button to select Alarm ON, then press
-
DOWN to select the alarm time
will appear on the display and, after the
>
RIGHT button until
Add
for the
/
-
DOWN button to select
cam 2
cam 3
/
/
Delete
menu to appear.
cam 4
will pop up, press the
is highlighted.
6h
5h
4h
3h
2h
,
,
,
,
. (The
is highlighted, and
Add
, and press the
+
UP button
O
Parent Unit Menu Options
Advertisement
Table of Contents
