Epson SureColor T5470M User Manual page 161

Setting
PC Connection via USB
USB I/F Timeout Setting
*The Printing Language, Universal Print Settings, and HP-GL/2 Unique Settings menus can be
locked by an administrator. If you cannot access or change these settings, contact your administrator for
assistance.
Paper Source Settings
Setting
Error Notice
Roll Paper Setup
Options Description
Enable Select Enable to allow access to the printer
from a USB-connected computer
Disable
5 to 300 seconds Specifies the length of time before ending
communication from a USB-connected
computer
Options Description
Paper Size Notice Select On to display an error message when
the output size or paper type settings are
Paper Type Notice
different between the driver and printer
Detect Paper Select On to display an error message and
Meandering stop printing if the printer detects the paper is
skewed
Print Cutting Guideline Select On to print cut lines on roll paper (if
Auto Cut is turned off)
Cut for Borderless Print Select Two Cuts to insert a margin and cut
twice between pages; or One Cut to cut once
between pages
Quick Cut Select On to cut once between pages while
the next page is still printing
Cut Mode Select Quiet to reduce the speed and noise
when cutting paper
Margin Refresh Select On to automatically remove ink stains
from previous borderless prints by trimming
the leading edge of the paper
Back Tension 2 Select the level of tension when the Back
Tension setting is set to Extra High
161