Gigabyte MZ72-HB2 User Manual page 89

2-3-3-4 Memory MBIST
Parameter
Memory MBIST
MBIST Enable
MBIST Test Mode
(Note)
MBIST Aggressors
(Note)
MBIST Per Bit Slave Die
Reporting
(Note)
Data Eye
Memory Healing BIST
(Note) This item is available when MBIST Enable is set to Enabled.
Description
Enable/Disable the Memory MBIST function.
Options available: Enabled, Disabled. Default setting is Disabled.
Selects MBIST Test Mode.
Interface Mode: Tests Single and Multiple CS transactions and Basic
Connectivity.
Data Eye Mode: Measures Voltage vs. Timing.
Options available: Auto, Both, Interface Mode, Data Eye Mode. Default
setting is Auto.
Enable/Disable MBIST Aggressor test.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Enable/Disable to report 2D data eye results in ABL log for each DQ,
Chipselect, and Channel.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Press [Enter] to configure advanced items.
Options available: Disabled, BIOS Mem BIST, Self-Healing Mem BIST, PMU
Mem BIST, BIOS and Self-Healing Mem BIST, BIOS and PMU Mem BIST,
PMU and Self-Healing Mem BIST, BIOS and PMU and Self-Healing Mem
BIST. Default setting is Disabled.
BIOS Setup
- 89 -