Philips GC2810/02 Manual page 15

Problem
The steam
boost function
does not work
properly.
Flakes and
impurities come
out of the
soleplate during
ironing.
The light on the
handle flashes
(GC2860 only).
Water droplets
drip on the
fabric during
ironing.
4239.000.7163.1.indd 15
Cause
You have used the
steam boost
function too often
within a very
short period.
The iron is not hot
enough.
Hard water forms
flakes inside the
soleplate.
The automatic
shut-off function
has been activated
(see chapter
'Features', section
'Automatic shut-
off ').
You have not
closed the cap of
the filling opening
properly.
EnGlISh
Solution
Continue ironing in horizontal
position and wait a while
before you use the steam
boost function again.
Set an ironing temperature at
which the steam boost
function can be used ( 3
to MAX). Put the iron on its
heel and wait until the
temperature light goes out
before you use the steam
boost function.
Use the Calc-Clean function
one or more times (see
chapter 'Cleaning and
maintenance', section 'Calc-
Clean function').
Pick the iron up or move it
slightly to deactivate the
automatic shut-off function.
The automatic shut-off light
goes out.
Press the cap until you hear a
click.
15
20-05-09 09:02