Philips GC2860 Service Manual

Philips Consumer Lifestyle
Service Manual
PRODUCT INFORMATION
Features
- Clour: Magenta
- Powerglide soleplate coating
- Pointed tip soleplate
- Steam output: 32 g/min
- Steam boost: 95 g/min
- Steam level control: 3 settings
- Drip stop system
- Spray feature
- Tank capacity: 270 ml
- Cord length: 2 m
- 360 degrees ball swivel
- Filling door
- Double active calc clean feature
- Vertical steam: 95 g/min
- Rubber bumper
- Electronic safety shut off
Safety Information
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements and
legal regulations as officially laid down at this moment.
TECHNICAL INFORMATION
Voltage : 220 - 240 V
Frequency : 50 - 60 Hz
Power : 1830 - 2200 W
Dimension (F-box) : 328 mm x 129 mm x 163 mm
(Width x Depth x Height)
Product net weight : 1.24 kg
Published by Philips Domestic Appliances and Personal Care
09/07
Steam Iron Power Life Successor
Water Advice
In case you live in an area with hard water (e.g. water hardness
more than 8 dGH), it is recommended to use a mixture of
50 % tap water and 50 % demineralized water.
Powerglide Soleplate
Silver solgel coating for more robust scratch resistance,
smooth gliding & easy to clean.
Pointed Tip
This feature allows soleplate to reach tricky area.
Steam Boost
The steam boost helps to remove stubborn wrinkles.
Drip Stop
The water tank bottom has a valve that is controlled by
a bimetal disc on the soleplate. Water is only released
into steam chamber via the tank valve when the soleplate
temperature is high enough. When the soleplate temperature
is too low, the tank valve is closed. This prevents water from
dripping onto the garment.
Double Active Calc Clean Function
Protects the iron from scale build-up via anti-calc tablets
within the water tank & the calc clean function.
Vertical Steam
This features a steam boost in vertical position to remove
wrinkles in hanging garments.
Electronic Safety Shut Off
The power to the heating element is cut off when the iron has
been motionless. The ASO pilot light starts blinking. When
the iron is moved, it is automatically switched on.
Printed in the Netherlands © Copyright reserved
GC2860
Subject to modification