System - D-Link DAP-1325-US User Manual

Section 3 - Configuration
This page allows you to save or restore your system configuration, reset, or reboot the DAP-1325. To access this page, click the
Management drop down menu at the top of the page, and select System. Click Save at any time to save the changes you have
made on this page.
Save Settings Save the system settings to a file to the local hard drive. You
To Local Hard will then see a file dialog where you can select a location and
Drive: enter a file name for the configuration file.
Load Settings Load the system settings from a previously saved file on the
From Local local hard drive.
Hard Drive:
Restore Restore the system settings to factory default settings. This
to Factory will erase all currently stored settings.
Default
Settings:
Reboot the Click Reboot to reboot the DAP-1325.
Device:
D-Link DAP-1325 User Manual

System

39