If you take a few minutes to look INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. through it, you'll learn how to use all the features of your new Jensen receiver for maximum enjoyment.
(-) battery cable prior to installation. mounting location is clear of wires, fuel and vacuum or brake lines. NOTE: If the JWM30 is to be installed in a vehicle equipped with an onboard drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost.
JWM30 WIRING WARNING: Wiring harness comes with stripped and tinned leads to aid in the installation process. Any unused speaker wires must have their exposed ends cut The wiring diagram depicts all the wiring connections required for proper off or insulated individually.
JWM30 BASIC OPERATION BAL: Adjust the speaker output balance between "L7" (left) and "R7" (right). Ÿ “BAL 0" indicates an equal balance between the left and right speakers. LOUDNESS: Toggle the loudness on/off. When listening to music at low Ÿ...
Page 7
Press the TIME button (19) to alternate between playing time and clock time Connect HDMI cable to JENSEN TV with ARC function and JWM30 radio head unit. If while in Tuner, USB, BT, HDMI In, TV Audio or auxiliary input mode.
Page 8
JWM30 See the ARC function Operation in the following table: Device Status Operation Results User Operation Remarks Head Unit Head Unit Power OFF TV, AV, USB, (Last mode is TV HDMI Power ON Head Unit Audio Out No Audio Out...
JWM30 TUNER OPERATION Automatically Store / Preset Scan (AS/PS) Automatically Store Select an AM or FM band. Press and hold the button (8) to access tuner menu list: AUTO STORE & PRESET SCAN. Press button (8) repeatedly until “AUTO STR”...
JWM30 MP3/USB OPERATION Play/Pause Press the button (8) to suspend or resume media playback. Track Select Press the buttons (7, 9) to select the next or previous track in the current folder. The selected track number will appear on the display.
Before you begin, consult the owner’s manual for the Bluetooth device you want to the list. You cannot delete a device that is actively connected. Press the ENTER pair with the JWM30. Make sure the device you intend to pair with is on and ready button to select the device. Press the button to choose Lock/Unlock, to pair.
JWM30 REMOTE CONTROL OPERATION AUX IN/HDMI IN/TV TUNER BUTTONS BLUETOOTH MP3/USB SETTING MENU AUDIO LOUD ALARM Turn radio on/standby Turn radio on/standby Turn radio on/standby Turn radio on/standby Turn radio on/standby Power mode. mode. mode. mode. mode. TUNE+ Turn volume up/down.
Page 13
JWM30 AUX IN/HDMI IN/TV BUTTONS TUNER BLUETOOTH MP3/USB SETTING MENU AUDIO Left/Right to navigate Directional Switch band menu items, Up/Down Buttons to adjust parameter Fast Forward/Fast Fast Forward/Fast Fast Reverse/ Reverse Reverse Forward Silence Audio output Pause/resume playback. Pause/resume playback. Silence Audio output...
JWM30 CARE AND MAINTENANCE TROUBLESHOOTING Keep the product dry. If it does get wet, wipe it dry immediately. Liquids – Symptom Solution might contain minerals that can corrode the electronic circuits. – Keep the product away from dust and dirt, which can cause premature wear Try the reset button.