Product Counters; Maintenance Settings; Cleaning Cycle; Boiler Descaling Cycle - Saeco RI9828/11 Operation And Maintenance Manual

MAIntenAnce settInGs

In this menu, adjustments can be made to clean/maintain all the machine's internal circuits. Press
"maintenance settings" on the main menu.
product
counters
10
lock
display
boiler
descaling
cycle
58
cleaning
cycle

cLeAnInG cYcLe

This function cleans the machine's internal circuits used for brewing coffee.
to rinse the brew group, simply clean with water as shown on page 33, on a regular basis. this tho-
rough cleaning cycle (below) completes the maintenance process of the brew group. We recommend
carrying out this cycle on a monthly basis, or every 500 coffees, using saeco cleaning tablets, which
can be purchased separately.
Note: before performing this function make sure that:
1. a large enough container is positioned under the spout;
2. the appropriate tablet for cleaning the brew group has been inserted into the
pre-ground bypass doser;
3. the water tank is full.
tHe cLeAnInG cYcLe cAnnot Be InteRRUPteD.
A PeRson MUst Be PResent DURInG tHe oPeRAtIon.
After accessing the cleaning cycle
menu, make sure that the cleaning
tablet has been inserted as shown
above. Press "yes".
This function shows how many beverages have been brewed for every single
type of coffee since the last reset.
This function temporarily locks the touch screen (e.g. to clean the display). To
reactivate the display, press "unlock" in the lower right-hand corner and then
(within two seconds) "unlock" in the upper left-hand corner (this message
appears only after pressing the previous icon).
This function enables the descaling cycle
(the machine indicates how many liters can be dispensed before descaling).
This function enables the cleaning cycle of the brew group.
1.4.2. cleaning cycle
yes
no
Have you inserted the cleaning tablet
and fi lled the water tank?
MAIntenAnce
Wait for the cleaning cycle to
fi nish (approximately 4 minutes).
The machine will return to the
main menu.
27