Taking Pictures Using Auto Bracket - Panasonic Lumix DMC-TS20R Owner's Manual For Advanced Features

Applicable modes:

Taking Pictures Using Auto Bracket

In this mode, 3 pictures are automatically recorded in the selected exposure
compensation range each time the shutter button is pressed.
With Auto Bracket d1 EV
1st picture
d0 EV
Press 3 [È] several times until [Auto Bracket]
appears.
Press 2/1 to set the compensation range of the
exposure and then press [MENU/SET].
•
When you do not use Auto Bracket, select [OFF] (d0).
Note
•
When Auto Bracket is set, [
•
When taking pictures using Auto Bracket after setting the exposure compensation range, the
pictures taken are based on the selected exposure compensation range.
When the exposure is compensated, the exposure compensation value appears on the lower
left of the screen.
•
The exposure may not be compensated with Auto Bracket depending on the brightness of the
subject.
•
[Œ] is set for the flash when Auto Bracket is set.
•
You cannot use the Auto Bracket in following conditions.
–
In [Panorama Shot] in Scene Mode
–
When recording motion pictures
Recording
2nd picture
j1 EV
] is displayed on the screen.
- 64 -
3rd picture
i1 EV