Table of Contents
Advertisement
The picture cannot be transferred when the camera is connected to a PC.
•
Is the camera connected to the PC correctly?
•
Is the camera recognized by the PC correctly?
> Select [PC] when connecting.
The card is not recognized by the PC. (The built-in memory is recognized.)
> Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
> If there are two or more USB terminal on a single PC, try connecting the USB connection
cable to another USB terminal.
The card is not recognized by the PC. (SDXC memory card is used)
> Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not
format.
> If the [Access] displayed on the LCD monitor does not disappear, disconnect the USB
connection cable after turning off the power.
There is a problem trying to upload to YouTube or Facebook.
> Confirm that the login information (login ID/user name/mail address/password) is correct.
> Confirm that the PC is connected to the Internet.
> Confirm that resident software such as virus protection software or firewall is not blocking
access to YouTube or Facebook.
> Confirm with YouTube or Facebook as well.
The picture cannot be printed when the camera is connected to a printer.
•
Pictures cannot be printed using a printer that does not support PictBridge.
> Select [PictBridge(PTP)] when connecting.
The ends of the pictures are cut at printing.
> When using a printer with a Cropping or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can
be printed.
The panorama picture is not printing correctly.
•
Since aspect ratio of a panorama picture differs from normal pictures, it may not always be
possible to print it correctly.
> Please use a printer that supports panorama pictures. (For details, please see the
operating instructions of your printer)
> We recommend using the "PHOTOfunSTUDIO" software on the CD-ROM (supplied) to
adjust the size of the still picture to the print paper size.
Others
(P120)
(P123)
- 148 -
Advertisement
Table of Contents
