Table of Contents
Advertisement
Others
[Requirements for Underwater use] is displayed repeatedly whenever the power
is turned on.
•
Press [MENU/SET] after viewing the last screen (12/12). For details, refer to P7.
An unreadable language was selected by mistake.
> Press [MENU/SET], select the [Setup] menu icon [
select the [~] icon to set the desired language.
A white lamp sometimes turns on when the shutter button is pressed halfway.
•
AF Assist Lamp will turn on white in the dark place to assist the focusing.
The AF Assist Lamp does not turn on.
•
Is [AF Assist Lamp] on the [Rec] menu set to [ON]?
•
The AF Assist Lamp does not turn on in bright places.
The camera becomes warm.
•
The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
The lens clicks.
•
When the brightness changes due to zoom or camera movement, etc., the lens may click and
the picture on the screen may drastically change. However, the picture is not affected. The
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
The side door will not close.
•
Have foreign objects become trapped?
> Remove the foreign objects.
•
When closing, do not set the [LOCK] switch to the locked side. Doing so may cause damage or
leaks.
> Release the lock.
(P8)
(P19)
Others
]. Then press [MENU/SET], and then
(P52)
(P91)
- 149 -
Advertisement
Table of Contents
