Sargent EC176 Series Manual page 6

Leisure Battery
13.9V GOOD
Vehicle Battery
12.2V FAIR
Water Tank Levels
FRESH 50% WASTE 0%
Select Battery
Battery = LEISURE
Adjust Hour
Hour = 13
Adjust Minute
Minute = 45
Issue 1
EC176 Power Control System
Here leisure battery information is shown.
The digit display shows the battery voltage followed by a guide to the battery
charge condition (i.e POOR, FAIR, GOOD, CHARGING).
The voltage is also shown on the LED bar graph below the display.
Pressing the levels
Here vehicle battery information is shown.
The digit display shows the battery voltage followed by a guide to the battery
charge condition (i.e POOR, FAIR, GOOD, CHARGING).
The voltage is also shown on the LED bar graph below the display.
Pressing the levels
rd
The 3 screen shows information relating to optional on-board water tank.
This screen is only available when the relevant tank is fitted.
The fresh water level is shown in ¼ steps (i.e. 0%, 25%, 50%, 75% & 100%)
The waste water level is shown in 1 step (i.e. 0% & 100%)
The displayed level is continuously refreshed if the water pump is turned on.
Pressing the levels
Here you can select which battery to use or charge.
By default the leisure battery is automatically selected. If the mains supply is
connected and the charger turned on, this battery will also be charged.
If you need to select the vehicle battery press the select
the selected battery from leisure to vehicle (or vice versa).
The relevant symbol (LBatt) or (VBatt) will be shown in the header area.
Information relating to the selected battery is shown on the screen.
Pressing the levels
Here you can adjust the hour display.
Press the select
button to rapidly increase the value.
Pressing the levels
Here you can adjust the minute display.
Press the select
button to rapidly increase the value.
Pressing the levels
Page 6 of 12
button to move to the next screen.
button to move to the next screen.
button to move to the next screen.
button to move to the next screen.
button to increase the value by 1. Press and hold the
button to move to the next screen.
button to increase the value by 1. Press and hold the
button to move to the next screen.
button to change
13 July 2018