Crosley CW-2 Use & Care Manual page 4

Using the Controls
STEP 1
Select Signal
End of Cycle Signal
When the cycle is complete, a signal will sound several
times. The End of Cycle Signal volume is adjustable.
To adjust the volume, select any setting between OFF
and LOUD.
STEP 2
Select Water Level
Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to reset and then back
to the desired setting.
WATER LEVEL SETTING
Ex. Low
Small
Medium
Large
Note
• Items must circulate freely for best results.
3
LOAD SIZE
1/4 Full
1/4 – 1/2 Full
1/2 – 3/4 Full
3/4 – Full
STEP 3
Select Wash/Spin Speed
Your washer has selectable wash and spin speed
combinations.
WASH/SPIN
SPEEDS
Sturdy fabrics needing maximum
Normal/Normal
water extraction
Sturdy fabrics needing a slower
Normal/Slow
spin speed because of wrinkling
Delicate fabrics needing slower
Slow/Slow wash and spin speed because of
clothing construction
STEP 4
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold
water for washing and cold or warm water for rinsing.
Use the chart below as a guide.
WASH/RINSE
TEMPS
White and heavily soiled, color-fast
Hot/Cold
items
Moderately soiled, colored items;
Warm/Cold
most wrinkle free items
Brightly colored, lightly soiled
Cold/Cold
items; washable woolens
LOAD TYPE
LOAD TYPE