Table of Contents
Advertisement
8-2-3
REC FUNCTION
Items/
Adjustable
Data Saved
Range
PRE REC TIME 0SEC
Set PRE RECORDING.
0-15SEC:
:
15SEC
<Note>
The maximum selectable range is 8 seconds
when the REC MODE in the <SYSTEM
MODE> screen is set to 50M (DVCPRO50).
– C U F –
LOOP REC
ON
Select whether or not to enable LOOP REC.
This setting can be used with PRE
MODE
OFF
RECORDING features.
ON:
OFF:
<Note>
After the power is turned off, this item will
default to OFF the next time the power is
turned on.
– – – F –
VOICE MEMO
ON
Set the available memory space for voice
RESERV
OFF
memos in P2 cards.
ON:
OFF: Do not reserve any voice memo
<Note>
Even when this item is set to OFF, and FULL
is displayed for the P2 card's recording
capacity, it may be possible to record voice
memos depending on the status of the P2
card.
– C U F –
REC START
ALL
Select operating modes that allow recording
to start.
NORMAL
ALL: Allow recording to start during stop,
NORMAL:
– C U F –
Remarks
Set the length of time that can be
retrospectively recorded before the
REC START button is pressed.
Enable LOOP REC.
Disable LOOP REC.
Reserve a voice memo area of 10
minutes or longer separately from the
video recording capacity. The voice
memo area can be used even when
FULL is displayed for the recording
capacity of the P2 card.
space.
recording pause, and playback.
Allow recording to start during stop
and recording pause.
8-2-4
OUTPUT SEL
Items/
Adjustable
Data Saved
Range
VIDEO OUT
VBS
Select the output signal on the VIDEO OUT
terminal.
SEL
VF
VBS: Output a regular composite signal.
Y
VF:
SDI
Y:
SDI:
– C U F –
OUTPUT CHAR TC
Set the character contents superimposed
onto the output signals for the VIDEO OUT
STATUS
terminal (Analog or SDI) and MON OUT
MENU
terminal.
ONLY
TC:
<Note>
The TC display position moves up and down
depending on the camera ID position.
STATUS:
MENU ONLY:
– C U F –
MONITOR OUT
ON
Select whether or not to superimpose
characters on the MON OUT terminal signal
CHAR
OFF
independently of the camera's VIDEO OUT
CHARACTER switch. (The character
content is the same as the video output
signal.)
ON:
OFF: Disable superimpose.
– C U F –
LCD MON
ON
Select whether or not to superimpose
characters on the LCD monitor. (The
CHAR
OFF
character content is the same as the video
output signal.)
ON:
OFF: Disable superimpose.
– C U F –
VF MODE
EE/PB
Select the image to display in the viewfinder.
EE
EE/PB: Display the playback image in the
EE:
– C U F –
THUMBNAIL
ON
Select whether or not to output clip
thumbnails displayed on the LCD monitor to
OUT
OFF
the video output and monitor output signals.
ON:
OFF:
– C U F –
The ____ in the Adjustable Range column indicates the preset
mode.
Remarks
Output a VF Y signal. The status
display is also superimposed.
Output a component Y signal.
Output an SDI signal. Only
selectable when the optional AJ-
YA902AG extension board is
attached.
Display the time code. (Displays the
menu when menu characters are
superimposed.)
Display the same characters
superimposed on the VF signal.
(Displays the menu when menu
characters are superimposed.)
Displays only when the menu
characters are superimposed. No
display appears when other
characters are superimposed.
Enable superimpose.
Enable superimpose.
(Not interlocked with the VIDEO OUT
CHARACTER switch.)
(Not interlocked with the VIDEO OUT
CHARACTER switch.)
playback mode.
Always display the camera image.
Enable output.
Disable output.
8
93
Advertisement
Table of Contents
