VTech CS6224-11 User Manual page 35

There is The handset may be out of
interference range. Move it closer to the
during a telephone base.
telephone
If you subscribe to high-
conversation.
speed Internet service (DSL
My calls fade
- digital subscriber line)
out when
through your telephone
I am using
line, you must install a
the cordless
DSL filter between the
handset.
telephone line cord
and the telephone wall
jack. The filter prevents
noise and caller ID
problems caused by DSL
interference. Contact your
DSL service provider for
more information about
DSL filters.
Appliances or other
cordless telephones
plugged into the same
circuit as the telephone
base can cause
interference. Try moving
the appliance or telephone
base to another outlet.
The location of your
telephone base can
impact the performance
of your cordless phone.
For better reception,
install the telephone base
in a centralized location
within your home or
office, away from walls
or other obstructions.
In many environments,
elevating the telephone
base improves overall
performance.
The telephone
does not
receive caller
ID or the
telephone does
not show caller
ID during call
waiting.
The display
shows Out of
range or no
pwr at base.
I cannot hear
any instruction
from the
handset when
I try to record,
play or delete
my own
announcement.
The outgoing
announcement
is not clear.
28
Caller ID is a subscription
service. You must subscribe
to this service from your
telephone service provider
for this feature to work on
your telephone.
Both your and the caller's
telephone service
providers must use
equipment compatible
with the caller ID service.
The caller may not be
calling from an area which
supports caller ID.
The caller ID information
displays after the first or
second ring.
The handset may be out of
range. Move it closer to the
telephone base.
Make sure the power cord
is securely plugged into
the telephone base. Use
a working electrical outlet
not controlled by a wall
switch.
The handset does not
have a speakerphone.
When recording, playing
or deleting your own
announcement, the
instructions are announced
through the handset
receiver. Make sure you
place the handset receiver
close to your ear.
When recording the
announcement, make sure
you speak in a normal
tone of voice towards
the microphone of the
handset.
Make sure there is no
background noise when
recording.