Use The Built-In Answering System And Voicemail Service; Retrieve Voicemail From Telephone Service; Retrieve Voicemail; Turn Off The New Voicemail Indicators - VTech CS6224-11 User Manual

Use the built-in answering
system and voicemail service
You can use your answering system and
voicemail service together by setting
your answering system to answer before
voicemail service answers as described
below. To learn how to program your
voicemail settings, contact your telephone
service provider.
If you are on a call, or if the answering
system is busy recording a message and
you receive another call, the second caller
can leave a voicemail message.
Set your answering system to answer
calls at least two rings earlier than your
voicemail service is set to answer. For
example, if your voicemail service answers
after six rings, set your answering system
to answer after four rings. Some voicemail
service providers may program the delay
before answering calls in seconds instead
of rings. In this case, allow six seconds per
ring when determining the appropriate
setting.
Retrieve voicemail from
telephone service
Voicemail is a feature available from most
telephone service providers. It may be
included with your telephone service, or
may be optional. Fees may apply.

Retrieve voicemail

When you received a voicemail, the
handset displays
To retrieve, you typically dial an access
number provided by your telephone
service provider, and then enter a security
code. Contact your telephone service
provider for instructions on how to
configure the voicemail settings and listen
to messages.
and New voicemail.
NOTE
• After you have listened to all new voicemail
messages, the indicators on the handset turn
off automatically.
Turn off the new voicemail
indicators
If you have retrieved your voicemail while
away from home, and the handset still
displays the new voicemail indicators, use
this feature to turn off the indicators.
NOTE
• This feature turns off the indicators only, it
does not delete your voicemail messages.
1. Press MENU when the phone is not in
use.
2. Press q or p to choose Settings and
then press SELECT.
3. Press q or p to choose Clr voicemail
and then press SELECT.
4. The screen displays Reset VM Icon?.
Press SELECT to confirm. You hear a
confirmation tone.

Register a handset

When your handset is deregistered from
the telephone base, follow the steps
below to register it back to the telephone
base.
1. Remove the handset from the
telephone base.
2. Press and hold /FIND HANDSET
at the telephone base for about four
seconds until the IN USE light turns
on.
3. Then press # on the handset. It displays
Registering...
The handset show Registered and you
hear a beep when the registration process
completes. The registration process takes
about 60 seconds to complete.
24