Philips TT3000/01 Manual page 26

English
26
4 Press the % button to increase the intensity.
To lower the intensity, press the ^ button.
, Every time you press the button, the
corresponding intensity light starts to flash.
This takes a few seconds.
5 Place the appliance at a 90° angle on the skin
so that the body attachment and the safety ring
are in contact with the skin.
Note: It may be difficult to have the safety ring
make proper contact with the skin on certain
areas. In that case, you could hold the Lumea for
men upside down, while you press the flash button
with your thumb.
6 Press the safety ring fully onto the skin with
slight pressure.
, The 'ready to flash' light on the back of the
appliance lights up green when all contact
switches of the safety ring are in contact with
the skin and the appliance is charged.
Note: The safety ring has contact switches that
together are the safety system of the appliance.
This safety ring prevents unintentional flashing
without skin contact.
Tip: For easier use, stretch the skin you want to treat.
On areas with softer skin, you may need to exert