Using The Appliance; First Use And Skin Test - Philips TT3000/01 Manual

English
24
Tanning with artificial light
- Follow the instructions in 'Sun exposure before
treatment' and 'Sun exposure after treatment'
above.
Tanning with creams
- If you have used artificial tanning lotion, wait until
the artificial tan has fully disappeared before you
use Philips Lumea for men.

Using the appliance

If the treatment becomes intolerably painful at
any point in time, reduce the light intensity setting
until the treatment is comfortable again. If you
notice skin reactions stronger than slight redness,
stop the treatment immediately and read section
'Possible side effects and skin reactions' in this
chapter.

First use and skin test

When you use the appliance for the first time,
we advise you to perform a skin test on the area
to be treated to check your skin's reaction to the
treatment and to get accustomed to light-based
treatment.
1 Choose an area close to the intended
treatment area.
2 Press the on/off button to switch on the
appliance.
, Intensity light 1 goes on automatically to indicate
that the appliance is switched on at default
intensity 1.