ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B2280HS
For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor's height
and angle to your own preference.
Hold the panel so that the monitor does not
topple when you change the monitor's height or
angle.
You are able to adjust the monitor's height up
to 130mm, angle up to 160° right and left, 22°
upward and 5° downward.
NOTE
Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.
Careful attention is required not to
catch your fingers or hands when you
change the height or the angle.
Injury can occur if care is not taken to
avoid finger contact with the displays
base when adjusting the height.
PANEL ROTATION : ProLite B2280HS
Adjust the monitor's height.
Rotate the panel 90°.
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
NOTE
Attempting to rotate without fully extending
upward may cause damage to stand.
Video card for portrait display will be
required for rotating the image on the
screen.
Adjust the monitor's angle to your preference.
Monitor
Stand
BEFORE YOU OPERATE THE MONITOR 13
130mm
90°