Iiyama ProLite B2280HS User Manual page 23

Extra
Adjustment Item
Reset
Signal Select
NOTE
At selected the AUTO, it will automatically be selected when just one source is available.
If there are more input sources available and you select one of them, the AUTO option is
not available.
If multiple inputs are connected, the monitor may not recover the last one used after
turning it off and on again.
It is only possible when you set a specific source.
1
Audio Input*
2
Overdrive*
Information
1
* Suitable for HDMI input only.
2
* Available for ProLite E2282HS only.
When Overdrive is activated, some level of image retention will be caused.
Direct
You can skip the Menu items and directly display an option settting screen by using the following
button operations.
 Signal Select: Press the AUTO button when the Menu is not displayed, it shows following Menu.
Signal select is switched by pressing the AUTO Button successively.
PICTURE ADJUST EXTRA
GEOMETRY
COLOR SETTINGS
OSD
EXTRA
Problem / Option
Yes Factory-preset data is restored.
No Return to Menu.
Auto Select the signal input automatically.
Select the Analog input.
VGA
Direct
DVI Select the Digital (DVI) input.
HDMI Select the Digital (HDMI) input.
HDMI Select the HDMI input.
LINE IN Select the LINE IN input.
Off / -2 / -1 / 0 / +1 / +2
It will improve the gray level response time of the
LCD panel.
A higher level results in a faster response time.
Displays information regarding the current input signal coming
from the graphic card in your computer.
NOTE
See your graphic card user guide for more information
about changing the resolution and refresh.
SELECT INPUT SOURCE
ProLite B2280HS
RESET YES NO
HDMI
SIGNAL SELECT
AUDIO INPUT HDMI
OVERDRIVE OFF
INFORMATION
ON
Button to Press
OPERATING THE MONITOR 19