Table of Contents
Advertisement
IDENTIFICATION OF LSMD-104 CONTROLS & CONNECTORS
1.
DC INPUT JACK
For connection to a source of 12 Volt DC power.
2.
EXTERNAL SPEAKERS OUTPUT
CONNECTOR
Supplies 2.0 W/Channel @ 4Ω (variable) for
connection of optional external speakers.
(L+, R+, Common Ground).
3.
L&R AUDIO/VIDEO (THROUGH) OUTPUT
JACKS
Supplies L&R Audio and Video signal for
connection to additional monitors, external
amplifiers, etc.
When the LSMD-104 is powered on, these out-
puts always feed the signal from the selected
input source.
When the LSM-104 is powered off, these outputs
always feed the signal from the program source
connected to A/V1.
4.
AUDIO/VIDEO 1 EXTENSION CABLE
CONNECTOR
For connection of supplied 15 foot L&R
Audio/Video 1 Extension Cable. The Extension
Cable receives A/V signals from and supplies 12
Volt DC Power & R-Link Connection to an exter-
nal KEC Mobile Applications VCP or DVD Player.
5.
ANTENNA INPUT JACK
For connection of an external television broad-
cast antenna.
6.
DOME LIGHTS SWITCH
Selects lighting mode.
7.
DOME LIGHTS
Provides additional vehicle lighting.
8.
LCD PANEL DROP-DOWN BUTTON
Side to release LCD Panel from stored position.
9.
DOME LIGHTS POWER CONNECTION
WIRES
Provides power to lamps (Refer to page 15 for
instructions on proper connection of this 4-wire
system).
10.
AUTO POWER SWITCH
Lowering LCD Panel automatically turns power
on.
11.
DVD PLAY BUTTON
Use this button to play a disc.
12.
DVD STOP BUTTON
Use this button to stop playing a disc.
13.
DVD EJECT BUTTON
Use this button to eject or load a disc.
14.
VOLUME DOWN & UP BUTTONS
Adjusts volume of (optional) speakers wired to
the External Speakers Output Connector (#2).
Also used in conjunction with the on-screen
menus.
15.
MENU BUTTON
Displays on-screen Main menu.
16.
CHANNEL DOWN & UP BUTTONS
Selects the next lower or higher channel stored in
memory. Also used to select menu items with
some on-screen menus.
17.
PICTURE BUTTON
Displays the on-screen Picture menu
18.
TV/VIDEO BUTTON
Press repeatedly to select the desired program
source: Broadcast TV, DVD, Video 1, Video 2.
19.
POWER BUTTON
Press to power the system ON/OFF.
20.
STAND-BY INDICATOR
Illuminates to indicate that 12 Volt DC Power is
available, but that LCD screen is not currently
powered on.
21.
REMOTE CONTROL SENSOR
Receives control signals from the remote control
hand unit. Also passes controls signals to an
external KEC Mobile Applications Videocassette
Player or DVD Player that is connected via an R-
Link cable.
22.
FM TRANSMITTER ANTENNA
Transmits low-power stereo audio signal for
reception on the vehicle's FM Radio.
23.
L&R AUDIO/VIDEO 2 INPUT JACKS
For connection of a 2nd external program source.
8
Advertisement
Table of Contents
